Ensure the adapter plug and camera case opening are free of debris, dirt, oil or liquid of any kind, and then insert the micro USB end of the plug into the camera.Push the silicone port protector into the opening of the camera's back cover, then pull the silicone port protector to remove. The port protector is attached on the inside of the camera case by a strap.Learn more about removing your back cover. Make sure the cable reaches to your camera without being stretched.If you own a Blink Outdoor (3rd Gen) camera, we recommend using the Blink Weather-Resistant 13ft IP55 Power Cable and Power Adapter Pack on Amazon. If a USB power cable is used with the XT and XT2 outside, your camera is no longer weatherproof when you remove the rubberized cover over the USB port. When power returns, your battery indicator for this camera will display the batteries as OK due to the USB power, but the batteries may be low or depleted. If your Sync Module is offline and your Wi-Fi is functional, your camera may continue to detect motion and record and upload clips for a short time period. However, if both your Sync Module and Wi-Fi router are not running on backup power, your camera will not function. If the camera is powered by USB with batteries installed and the power goes out, the camera will continue to run on the available battery power. There will be a small amount of drain on your batteries even when your device is powered by a USB cable. Remove the batteries if you are planning to store your Blink devices for an extended time period. The lithium batteries that are included with the Blink device do not have any capability of being recharged.ĭo not use lithium-ion, alkaline, or rechargeable batteries in your Blink camera. Use only size AA 1.5 volt lithium non-rechargeable batteries. Using a USB cable with a power adapter Indoor camera use A cable and power adapter comes included in the box. Blink Mini cameras do not use batteries and are powered by USB.For proper safety, use a 5V/1A USB power adapter.This can be beneficial for cameras that are frequently used or capture motion or live view often. Plugging your camera into power adapter with a USB cable allows the batteries to not drain as quickly. The USB port on the back of all Blink cameras can be used with a micro USB cable and adapter to power them, rather than using batteries. Use this article to understand how to install a micro USB cable on a Blink camera.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |